Nortel DMS-100 Manual page 486

Emergency shutdown of one LGC, LTC, and DTC unit
16 Repeat steps 14 and 15 until all links between the manual busy XPM unit and
the network are manual busy. Complete the procedure and proceed to step
17.
17 Wait 2 min. Go to step 25.
18 Determine the speech link numbers that associate with the manual busy XPM
unit. Even numbered speech links associate with unit 0. Odd numbered
speech links associate with unit 1.
Note: Speech links 0, 2, 4 and 6 associate with XPM unit 0 in the ENET
example in step 9. Speech links 1, 3, 5, and 7 associate with XPM unit 1.
19 Record the ENET plane number, shelf number, card number, and network link
number that associate with each speech link recorded in step 18.
Note: Speech link 3 associates with ENET plane 1, shelf 0, card 24, and
network link number 01. The association appears in the ENET example in
step 9.
20 To access the NET level of the MAP display, type
>NET
and press the Enter key.
21 To access the MAP display for the ENET card that associates with the first
speech link, type
>SHELF
and press the Enter key.
where
22 To deload traffic from the ENET card, type
>DELOAD
and press the Enter key.
where
23 To busy the first link recorded in step 18 from the ENET card to the XPM unit,
type
>BSY
and press the Enter key.
where
Emergency power conservation recovery procedures
plane_no
is the network plane (0 or 1)
link_no
is the network link number
shelf_no; CARD
shelf_no
is the ENET shelf number
card_no
is the ENET card number
plane_no
plane_no
is the ENET plane number
plane_no LINK
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Emergency power conservation
card_no
SET
link_no
5-135
(continued)