Nortel DMS-100 Manual page 275

4-68 Recovery procedures for individual devices and services
Recovering AMA data without DIRP block numbers
32
33
34
35
36
37
38
39
40
297-8021-545 Standard 14.02 May 2001
To confirm the information, type
>YES
and press the Enter key.
Example of a MAP display:
REQUEST SENT TO SUBSYSTEM, CHECK DIRP LOG FOR DETAILS
Wait for a DIRP101 log to confirm the rotation.
If
If the DIRP101 log
confirmed the rotation
did not confirm the rotation
To access the disk utility, type
>DISKUT
and press the Enter key.
To locate the block number that the data center received after the DPP power
failure, type
>LISTVOL vol_name
and press the Enter key.
where
vol_name
is the parallel volume name that you determined in step 17
Example of a MAP display:
DSKUT
>LISTVOL D000AMAP ALL
Note the active file name.
Note the Last Modified date and time of each file.
To exit the disk utility, type
>QUIT
and press the Enter key.
To return to the DIRP level of the MAP, type
>DIRP
and press the Enter key.
To dump the contents of the AMA file, type
>AMADUMP BC file_name
and press the Enter key.
Do
Do
step 34
step 72
ALL
(continued)