Nortel DMS-100 Manual page 226

Recovery procedures for individual devices and services
Checking for message throughput
and pressing the Enter key.
where
rteset_name
is the name of the routeset associated with the linkset chosen at step 4
Example input:
>POST C SSP100_RT
Example of a MAP response:
C7Routeset SSP100_RT
Rte State
0 SysB
1 SysB
7 Determine which linksets in the posted routeset are causing problems.
If
one or more linksets are out of service
no more out-of-service linksets, exist but routesets
associated with call completion problems still exist
no more out-of-service linksets, exist and there are
no more routesets on your list of routesets made in
step 2
8 Choose a linkset on which to work.
9 Access the C7LKSET level of the MAP display by typing
>C7LKSET
and pressing the Enter key.
10 Post the linkset by typing
>POST C linkset_name
and pressing the Enter key.
where
linkset_name
is the name of the linkset chosen in step 8
Example of a MAP response:
DMS-100 Family NA100 Recovery Procedures LET0015 and up
SysB
Mode Cost Linkset
Assoc 0 SSP100_LK
Quasi 1 SSP101_LK
4-19
(continued)
Linkset Transfer
State Status
SysB TFP
SysB TFP
Do
step 8
step 4
step 52