Nortel DMS-100 Manual page 475

5-124 Emergency power conservation recovery procedures
Emergency power conservation
Emergency shutdown of one half of a line module pair
4
5
6
297-8021-545 Standard 14.02 May 2001
WARNING
Static electricity damage
Wear a wrist strap that connects to a wrist-strap grounding
point on the frame supervisory panel (FSP) or a modular
supervisory panel (MSP) to handle circuit cards. The wrist
strap protects the cards against static electricity damage.
Pull down and set the handle of the POWER switch for the NT2X70 power
converter in slot 20 to the OFF position.
Repeat steps 2 to 4 to power down each LM .
Return to the procedure Emergency power conservation—Shutdown in this
document. Proceed when the step-action procedure directs you to go.
(end)