Nortel DMS-100 Manual page 498

Emergency shutdown of one LIM unit on each LPP
Note: F-bus 0 associates with LIM unit 0. F-bus 1 associates with LIM
unit 1.
If the response
is LIM x FBus y Busy
initiated.
LIM
passed.
is LIM x FBus y Busy re-
quires
because the following
NIUs may be active on
this bus...
NIU xx unit 0
NIU xx unit 1
Please
Y, NO, or N)
5 To confirm the command , type
>YES
and press the Enter key.
6 To quit the F-bus level of the MAP display, type
>QUIT
and press the Enter key.
7
To manually busy the LIM unit that you will power down, type
>BSY
and press the Enter key.
where
Emergency power conservation recovery procedures
Emergency power conservation
x FBus y Busy
confirmation
confirm (YES,
WARNING
Possible loss of service
Make sure that the mate LIM unit is in service before you
manually busy the LIM unit that you will power down.
Failure to follow this procedure can isolate nodes on LIS 1, 2,
and 3.
UNIT unit_no
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Do
step 6
step 5
5-147
(continued)