Nortel DMS-100 Manual page 334

Recovering a stuck HLIU under a composite clock failure
12 To clear the HLIU of ISTb state after the composite clock is recovered,
perform step 13 and step 14 during a scheduled maintenance interval.
13 To start clearing the HLIU of ISTb state, manually busy the HLIU in ISTb state
by typing
>BUSY hliu_no
and pressing the Enter key.
where
hliu_no
14 To return the ManB HLIU to service, type
>RTS hliu_no
and press the Enter key.
where
hliu_no
15 You have completed the procedure.
Recovery procedures for individual devices and services
is the number of the HLIU
is the number of the HLIU
DMS-100 Family NA100 Recovery Procedures LET0015 and up
4-127
(end)