Nortel DMS-100 Manual page 190

Recovering link peripheral processors
unit_no
is the unit number of the busy NIU unit (0 or 1)
If the RTS command
passed
failed
34 Determine if the other unit of the posted NIU is system busy or in-service.
If
both units of the posted NIU are
InSv
one unit of the posted NIU is
SysB
35 To manually busy the system-busy NIU unit, type
>BSY UNIT
and press the Enter key.
where
unit_no
is the number of the system-busy NIU unit (0 or 1)
Go to step 32.
36 To post the system-busy LIU7s that failed to recover, type
>POST LIU7
and press the Enter key.
where
liu_nos
are the numbers of the system-busy LIU7s (0 to 511)
Note: Use a space to separate each number.
Example input
>POST LIU7
37 To manually busy the LIU7s in the posted set, type
>BSY ALL
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
unit_no FORCE
liu_nos
101 102 103
FORCE
Do
step 34
step 85
Do
step 18
step 35
104 105 106 107
3-23
(continued)
108