Nortel DMS-100 Manual page 236

Recovery procedures for individual devices and services
If traffic on the link is
running, and the linkset is out of service
not running
51 Check if there are more out-of-service links in the linkset on which you are
working.
If there are
more out-of-service links in the linkset on which you
are working
no more out-of-service links in the linkset on which
you are working
52 Access the C7RTESET level of the MAP display by typing
>C7RTESET
and pressing the Enter key.
Example of a MAP display
C7Routeset SSP100_RT
Rte State
0 InSv
1 InSv
53 Determine the state of all recorded routesets.
If the state of all recorded route-
sets is
InSv
anything else
54 For additional help, contact the personnel responsible for the next level of
support.
55 You have completed this procedure.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for message throughput
InSv
Mode Cost Linkset
Assoc 0 SSP100_LK
Quasi 1 SSP101_LK
Do
step 40
step 51
Do
step 12
step 7
Linkset
State
InSv
InSv
Do
step 55
step 54
4-29
(end)
Transfer
Status
TFA
TFA