Nortel DMS-100 Manual page 233

4-26 Recovery procedures for individual devices and services
Checking for message throughput
42
43
44
297-8021-545 Standard 14.02 May 2001
Note: The link_no shown applies only to the ITU protocol. ITU is the only
protocol that supports MLIU.
If the INH command
passed
failed
Manually busy the link by typing
>BSY link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
MAP response:
ENTER YES TO
CONFIRM BSY
OR NO TO QUIT
Confirm the command by typing
>YES
and pressing the Enter key.
If the BSY command
passed
failed
To deactivate the link, type
>DEACT link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the DEACT command
passed
failed
(continued)
Do
step 42
step 54
Do
step 44
step 54
Do
step 45
step 54