Nortel DMS-100 Manual page 215

4-8 Recovery procedures for individual devices and services
Checking for call completion
16
17
18
19
20
297-8021-545 Standard 14.02 May 2001
(continued)
and pressing the Enter key.
Return the LIU7 or MLIU to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
anything else
Force the LIU7 or MLIU to busy by typing
>BSY FORCE
and pressing the Enter key.
Reset the LIU7 or MLIU by typing
>PMRESET
and pressing the Enter key.
If the PMRESET command
passed, and the LIU7 is ISTb or
InSv
passed, and the LIU7 is ManB
failed, and the LIU7 is ManB
Note: Where the link interface unit is an MLIU, MLIU is shown in the MAP
display in place of LIU7.
Reload the LIU7 or MLIU by typing
>LOADPM
and pressing the Enter key.
If the LOADPM command
passed
failed
Return the LIU7 or MLIU to service by typing
>RTS
Do
step 36
step 17
step 50
Do
step 36
step 20
step 19
Do
step 20
step 50