Nortel DMS-100 Manual page 187

3-20 Node level recovery procedures
Recovering link peripheral processors
17
18
19
20
21
297-8021-545 Standard 14.02 May 2001
To access the PM level of the MAP display, type
>PM
and press the Enter key.
To display a list of all system-busy PMs, type
>DISP STATE SYSB
and press the Enter key.
Example of a MAP response:
SysB LIM : 0
SysB LIU7 : 102, 202, 207, 302, 308
SysB HLIU : 309, 311, 315, 330, 350
SysB HSLR : 309, 311, 315, 330, 350
Determine which of the Series III PM types are system busy.
If there are
any system-busy LIMs
any system-busy NIUs
any system-busy LIU7s
any system-busy HLIUs
any system-busy HSLRs
any system-busy SVR7s
any system-busy EIUs
any system-busy APUs
any system-busy VPUs
any system-busy XLIUs
any system-busy FRIUs
no system-busy Series III PMs
Select a system-busy LIM to work on.
To post the system-busy LIM, type
>POST LIM lim_no
and press the Enter key.
where
lim_no
is the number of the LIM (0 to 16)
(continued)
Do
step 20
step 29
step 36
step 42
step 48
step 54
step 60
step 65
step 70
step 75
step 80
step 86