Nortel DMS-100 Manual page 474

Emergency shutdown of one half of a line module pair
Emergency shutdown of one half of a line module pair
At the MAP terminal
1
To access the PM level of the MAP display, type
>MAPCI;MTC;PM
and press the Enter key.
2 To post the LM that you will power down, type
>POST
and press the Enter key.
where
Example of a MAP response:
LM
3 To manually busy the LM, type
>BSY
and press the Enter key.
Example of a MAP response:
LM 0 Bsy
OK.
Emergency power conservation recovery procedures
WARNING
Potential service interruption or extended outage
Nortel recommends that you contact the Emergency
Technical Assistance Services (ETAS) or the next level of
support before you perform this procedure.
WARNING
Potential loss of service or extended outage
Perform this procedure to conserve emergency backup
power. Do not use this procedure or sections of this
procedure for equipment maintenance purposes.
LM HOST frame
frame
is the frame number (00 to 99)
pair
is the frame pair number (0 to 1)
HOST 00 0 Insv
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Emergency power conservation
pair
5-123
(continued)