Nortel DMS-100 Manual page 216

Recovery procedures for individual devices and services
and pressing the Enter key.
If the RTS command
passed
failed
21 Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
22 Post the HLIU by typing
>POST HLIU
and pressing the Enter key.
where
liu_no
is the number of the HLIU (0 to 511) associated with the link you chose
in step 12
If the state of the HLIU is
SysB or OffL
ManB
InSv
23 Force the HLIU to busy by typing
>BSY FORCE
and pressing the Enter key.
24 Return the HLIU to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
anything else
25 Force the HLIU to busy by typing
>BSY FORCE
and pressing the Enter key.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for call completion
Do
step 36
step 50
liu_no
Do
step 23
step 24
step 29
Do
step 29
step 25
step 50
4-9
(continued)