Nortel DMS-100 Manual page 240

Recovery procedures for individual devices and services
At the MAP display:
3 To access the MP position level type:
>MAPCI;MTC;PM;POST
and press the Enter key.
where
x
is the recovered TPC
4 To post MP positions that are system busy, type:
> MP;POST P SB
and press the Enter key.
If MP position
is SysB
is InSv
5 To busy the MP position, type:
>BSY
and press the Enter key.
6 To return the MP position to service, type:
>RTS
and press the Enter key.
If RTS
passes
fails
7 To test the MP position, type:
>TST
and press the Enter key.
If TST
passes
fails
8 Refer to TOPS MP Trouble Locating and Clearing Procedures and return to
step 9.
9 To return the MP position to service, type:
>RTS
DMS-100 Family NA100 Recovery Procedures LET0015 and up
MP position (integrated)
recovery
TPC x,MP
Do
step 5
step 12
Do
step 10
step 7
Do
step 9
step 8
4-33
(continued)