Nortel DMS-100 Manual page 257

4-50 Recovery procedures for individual devices and services
PM TPC
recovery
(continued)
16
At the TAMI:
17
18
19
20
21
297-8021-545 Standard 14.02 May 2001
Clear TAMI failure. Refer to TOPS MP Trouble Locating and Clearing
Procedures and return to step 17.
To access TPC Logs from the TAMI main menu, type:
>1
and press the Enter key.
Check the logs to determine the type of error.
If error
is position failure
is link failure
is TPC hardware
is other than listed here
Clear position failure. Refer to MP Position Recovery (integrated) or MP
Position Recovery (standalone ). Return to step 22.
Clear link failure. Refer to TOPS MP Trouble Locating and Clearing
Procedures . Return to step 22.
To reset the TPC, lower and lift the SBC reset switch.
Do
step 19
step 20
step 21
step 25