Nortel DMS-100 Manual page 325

4-118 Recovery procedures for individual devices and services
Recovering a stuck HLIU or HSLR
10
11
12
13
14
15
297-8021-545 Standard 14.02 May 2001
Perform this step for both F-bus taps associated with the stuck HLIU or HSLR.
Return the F-bus taps associated with the stuck HLIU or HSLR to service by
typing
>RTS FBUS fbus_no
and pressing the Enter key.
where
fbus_no
is the number of the F-bus (0 or 1)
tap_no
is the number of the F-bus tap (0 to 11)
Perform this step for both F-bus taps associated with the stuck HLIU or HSLR.
Example of a MAP response:
LIM lim_no LIS lis_no FBus fbus_no Tap tap_no Return
to Service initiated.
If the RTS command
passed
failed
Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
Post the stuck HLIU or HSLR by typing
>POST HLIU liu_no
and pressing the Enter key.
or
>POST HSLR liu_no
and pressing the Enter key.
where
liu_no
is the number of the stuck HLIU or HSLR (0 to 511)
Manually busy the HLIU or HSLR by typing
>BSY
and pressing the Enter key.
Confirm the command by typing
>YES
and pressing the Enter key.
Prepare to unseat and reseat the cards that belong to the stuck HLIU or
HSLR.
(continued)
tap_no
Do
step 28
step 11