Nortel DMS-100 Manual page 196

Recovering link peripheral processors
60 To post the system-busy EIUs that failed to recover, type
>POST EIU
and press the Enter key.
where
eiu_nos
are the numbers of the system busy EIUs (0 to 511)
Note: Use a space to separate each number.
Example input
>POST EIU
61 To manually busy the EIUs in the posted set, type
>BSY ALL
and press the Enter key.
62 To load the posted EIU, type
>LOADPM
and press the Enter key.
If the LOADPM command
passed
failed
63 To return the EIU to service, type
>RTS EIU
and press the Enter key.
where
eiu_no
is the number of the EIU (0 to 511) that you want to return to service
If the RTS command
passed, but not all EIUs in the
posted set are in service
passed and all EIUs in the posted
set are in service
failed
64 To display the next EIU in the posted set, type
>NEXT
and press the Enter key.
Go to step 62.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
eiu_nos
101 102 103
FORCE
eiu_no
104 105 106 107
Do
step 63
step 85
Do
step 64
step 18
step 85
3-29
(continued)
108