Nortel DMS-100 Manual page 379

5-30 Emergency power conservation recovery procedures
Emergency power conservation
Restoring the LCMs to duplex operation
Restoring the LCMs to duplex operation
At the LCM
1
At the MAP terminal
2
3
297-8021-545 Standard 14.02 May 2001
WARNING
Potential extended equipment outage
Nortel recommends that you contact the Emergency
Technical Assistance Services (ETAS) to expedite recovery
of equipment.
WARNING
Potential loss of service or extended outage
This procedure restores normal operation after you
performed emergency power conservation measures. Do not
use this procedure or sections of this procedure for
equipment maintenance purposes.
WARNING
Static electricity damage
Wear a wrist strap that connects to the wrist-strap grounding
point of a frame supervisory panel (FSP) or a modular
supervisory panel (MSP) to handle circuit cards. The wrist
strap protects the cards against static electricity damage.
Turn on the appropriate circuit breakers at the FSP or MSP.
To access the peripheral module (PM) level of the MAP display, type
>MAPCI; MTC;PM
and press the Enter key.
To post the LCM , type
>POST LCM HOST
and press the Enter key.
where
frame
is the frame number (00 to 99)
pair
is the frame pair number (0 to 1)
(continued)
frame pair