Nortel DMS-100 Manual page 386

Restoring the LGCs, LTCs, and DTCs to duplex operation
15
16
17
18
19
20
Emergency power conservation recovery procedures
Emergency power conservation measures
LINK 0: ENET 0
LINK 1: ENET 1
LINK 2: ENET 0
LINK 3: ENET 1
LINK 4: ENET 0
LINK 5: ENET 1
LINK 6: ENET 0
LINK 7: ENET 1
Determine if the network on your switch is a junctored network (JNET) or
enhanced network (ENET).
If the network
is JNET
is ENET
Determine the XPM unit that is manual busy (0 or 1). Record the speech link
numbers (0 to 31) associated with the XPM. Even numbered speech links (0,
2, 4 ... 30) associate with XPM unit 0. Odd numbered speech links (1, 3, 5 ...
31) associate with XPM unit 1.
Note: Speech link numbers 5 to 30 do not appear in the example in step
14. The links associated with XPM unit 1 are manual busy.
Record the network plane number, network module (pair) number, and
network link number for each speech link recorded in step 16.
Note: A JNET example response appears in step 14. In this example,
speech link 2 associates with network plane 0, network module number 1,
and network link number 4.
To access the NET level of the MAP display, type
>NET
and press the Enter key.
To access the network link level for the first network link that you return to
service, type
>LINKS n
and press the Enter key.
where
n
is the network module number recorded in step 17
To return the first network link to service, type
>RTS plane_no link_no
and press the Enter key.
where
DMS-100 Family NA100 Recovery Procedures LET0015 and up
0 14 01 0;CAP MS;Status:OK
0 24 01 0;CAP MS;Status:MBsy
0 14 01 1;CAP MS;Status:OK
0 24 01 1;CAP MS;Status:MBsy
0 14 01 2;CAP MS;Status:OK
0 24 01 2;CAP MS;Status:MBsy
0 14 01 3;CAP MS;Status:OK
0 24 01 3;CAP MS;Status:MBsy
Do
step 16
step 22
5-37
(continued)