Nortel DMS-100 Manual page 197

3-30 Node level recovery procedures
Recovering link peripheral processors
65
66
67
68
69
70
297-8021-545 Standard 14.02 May 2001
To post the system-busy APUs that failed to recover, type
>POST APU apu_nos
and press the Enter key.
where
apu_nos
are the numbers of the system-busy APUs (0 to 511)
Note: Use a space to separate each number.
Example input
>POST APU 101
To manually busy the APUs in the posted set, type
>BSY ALL FORCE
and press the Enter key.
To load the posted APU, type
>LOADPM
and press the Enter key.
If the LOADPM command
passed
failed
To return the APU to service, type
>RTS
and press the Enter key.
If the RTS command
passed, but not all APUs in the
posted set are in service
passed and all APUs in the post-
ed set are in service
failed
To display the next APU in the posted set, type
>NEXT
and press the Enter key.
Go to step 67.
To post the system-busy VPUs that failed to recover, type
>POST VPU vpu_nos
and press the Enter key.
(continued)
102 103 104 105
Do
step 68
step 85
Do
step 69
step 18
step 85
106 107 108