Nortel DMS-100 Manual page 177

3-10 Node level recovery procedures
Recovering the enhanced network
33
At the MAP terminal
34
35
36
297-8021-545 Standard 14.02 May 2001
Determine if the image file name has a date stamp.
If the file
has a date stamp
does not have a date stamp
CAUTION
Improper image file name prohibits download of patches
When you copy the file to disk, remove the date stamp or
other information added to the file name on tape. Failure to
remove excess information prohibits the automatic download
of patches to the local operating company switch.For
additional information, refer to How to record a 16K ENET
image on an SLM disk in Routine Procedures.
To change the image file name to the correct file name, type
>RENAMEFL old_file_name
and press the Enter key.
where
old_file_name
is the name of a previous image file with a datestamp (for example,
ENC33BM_0227)
new_file_name
is the correct file name (for example, ENC33BM)
Example of a MAP response:
File ENC33BM_0227 on volume S01DISLOADS has been renamed
to ENC33BM.
To quit the disk utility level of the MAP display, type
>QUIT
and press the Enter key.
To access the SYSTEM level of the MAP display, type
>MAPCI;MTC;NET;SYSTEM
and press the Enter key.
Example of a MAP response:
(continued)
Do
step 34
step 35
new_file_name