Nortel DMS-100 Manual page 292

Recovery procedures for individual devices and services
link_no
is the number of the link in the posted linkset (0 to 7)
If the RTS command
passed
failed
36 To activate the link, type
>ACT link_no
and press the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the ACT command
passed
failed
37 To determine if traffic is running on the link, type
>QUERYTRF
and press the Enter key.
where
link_no
is the number of the link in the linkset (0 to 15)
link_no
is the number of the link in the linkset (0 to 7)
Example of a MAP response for LIU7 links:
QueryTrf: Link occupancy for 13:30:00 – 14:00:00
Link Speed
0 7000
Note: For LIU7 or MLIU links, in the Byte/sec and Erlang fields, a value of
0 (zero) means that no traffic is running, and a value greater than zero
means that traffic is running. In this example, no traffic is running on the
link.
Example of a MAP response for high-speed (DLIU) links:
QueryTrf: Link occupancy for 13:30:00 – 14:00:00
Link CellRate
0 3622
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Recovering CCS7 linksets
link_no
Byte/sec Erlang
0 0.00
Cell/sec CPU Occ
691 51%
Do
step 36
step 41
Do
step 37
step 44
MSU len %RTx
17 0
MSU len %RTx
25 0
4-85
(continued)
Msg/sec
0
Msg/sec
671