Nortel DMS-100 Manual page 144

Recovering from a dead system in a SuperNode SE switch
60
61
62
63
MAP response:
Pref>
To determine if the system time is correct, type
>TIME
and press the Enter key.
Example of a MAP response:
Time is 14:55:50
If the system time
is correct
is wrong
To enter the correct time (use the 24-h clock), type
>SETTIME hh mm
and press the Enter key.
where
hh
is the hour (00 to 23)
mm
is the minute (00 to 59)
Example input:
>SETTIME 16 55
Example of a MAP response:
Warning:There is an automated TOD clock change request
scheduled on:1996/10/15 at 1:00 (see table
DSTTABLE).
Do you want to proceed with this request?
Please confirm ("YES", "Y", "NO", or "N"):
To confirm the command, type
>Y
and press the Enter key.
Example of a MAP response:
Time is 16:55:00 on TUE 1996/10/15.
Determine if the system date is correct
If the system date
is correct
is wrong
DMS-100 Family NA100 Recovery Procedures LET0015 and up
System level recovery procedures
Do
step 63
step 61
Do
step 66
step 64
2-97
(continued)