Checking For Call Completion (Continued) - Nortel DMS-100 Manual

Recovery procedures for individual devices and services
47 You have restored traffic to the link, but the linkset is still out of service.
Contact the far-end office. Tell far-end personnel that you have in-service or
in-service trouble links, and that the associated linkset is out of service.
Go to step 7.
48 Access the C7RTESET level of the MAP display by typing
>C7RTESET
and pressing the Enter key.
Example of a MAP display:
C7Routeset SSP100_RT
Rte State
0 InSv
1 InSv
49 Determine the state of the routeset.
If the state of the routeset is
InSv
anything else
50 For further assistance, contact the personnel responsible for the next level of
support.
51 You have completed this procedure.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for call completion
Mode Cost Linkset
Assoc 0 SSP100_LK
Quasi 1 SSP101_LK
InSv Linkset
State
InSv
InSv
Do
step 4
step 50
4-15
(end)
Transfer
Status
TFA
TFA