Nortel DMS-100 Manual page 51

2-4 System level recovery procedures
Booting a DMS switch
Booting a DMS switch
At your current location
1
At the CM reset terminal for the INACTIVE CPU
2
297-8021-545 Standard 14.02 May 2001
(continued)
CAUTION
Contact the next level of support
Do not attempt this procedure before you contact the next
level of support.
WARNING
Extended service interruption
If you boot the switch from tape, the boot requires more
recovery time than when you boot from disk. Make sure you
boot from disk when possible. Call processing resumes more
quickly after you boot from disk.
Determine from office records the name and location of the most recent office
image file.
If the most recent image file
resides on the SLM disk
resides on the SLM tape
WARNING
Set the ITOC file
Ensure the ITOC file is set if the most recent image file
resides on the SLM disk. This is necessary for proper system
initialization.
To jam the inactive central processing unit (CPU), type
>\JAM
and press the Enter key.
RTIF response:
Do
step 2
step 2