Nortel DMS-100 Manual page 274

Recovering AMA data without DIRP block numbers
28 To query the volumes, which are now mounted in the AMA subsystem, type
>QUERY
and press the Enter key.
Example of a MAP display:
SSNAME SSNO SEQNO ROTATES POOLNO PARLPOOL EMERGENCY
AMA 0
REGULAR VOLUMES
VOL# VOLNAME
PARALLEL VOLUME(S)
VOL# VOLNAME STATE
0 D00AMA2 READY
29 From the MAP response you obtained in step 28, determine if you have
parallel volumes in the available state.
If
If parallel volumes
are available
are not available
30 Add a new disk volume.
Refer to Setting up parallel recording on disk in the DIRP utility in Routine
Maintenance Procedures , and return to this point.
31
To rotate the subsystem, type
>ROTATE
and press the Enter key.
Example of a MAP display:
**WARNING–MANUAL PARALLEL ROTATIONS REDUCE THE TOTAL
**AMOUNT OF PARALLEL DATA RETENTION ON THE SWITCH
SENDING REQUEST TO SUBSYSTEM
PLEASE CONFIRM ("YES" OR NO"):
Recovery procedures for individual devices and services
AMA VOLUMES
1 2 0
STATE IOC CARD
IOC CARD VOL
0 0
CAUTION
Loss of parallel data
Manual parallel rotations reduce the total amount of parallel
data that the switch retains. Loss of parallel data can occur.
AMA PARALEL
DMS-100 Family NA100 Recovery Procedures LET0015 and up
6 NO
VOL FSEG ROOM
FSEG ROOM VLID
0 N/A 1 2400
Do
Do
step 31
step 30
4-67
(continued)
VLID FILES
CURR
YES