Nortel DMS-100 Manual page 81

2-34 System level recovery procedures
Performing a reload-restart
9
10
11
At the CM reset terminal for the ACTIVE CPU
12
13
14
297-8021-545 Standard 14.02 May 2001
(continued)
To restart the inactive CPU, type
>\RESTART RELOAD
and press the Enter key.
RTIF response:
Please confirm: (YES/NO)
To confirm the restart procedure, type
>YES
and press the Enter key.
RTIF response:
RESTART DONE
Wait for the CPUs to drop synchronization.
Note: The word NoSync appears in the reset terminal status bar when the
CPUs drop synchronization.
To override the active CPU, type
>\OVERRIDE
and press the Enter key.
RTIF response:
TEMP. RESET/JAM ENABLE
To restart the active CPU, type
>\RESTART RELOAD
and press the Enter key.
RTIF response:
Please confirm: (YES/NO)
To confirm the command, type
>YES
and press the Enter key.
RTIF response:
RESTART DONE