Nortel DMS-100 Manual page 181

3-14 Node level recovery procedures
Recovering the enhanced network
54
55
56
57
58
59
60
297-8021-545 Standard 14.02 May 2001
Determine if any of the nodes failed to return to service.
If
any of the nodes failed to return
to service
all nodes returned to service
To return to service the node that failed, type
>RTS plane_number
and press the Enter key.
where
plane_number
is 0 or 1
shelf_number
is 0 to 1 for 64K ENET, or 0 to 7 for 128K ENET
If the RTS command
passed
failed
Determine if the system generated a card list.
If the system
generated a card list
did not generate a card list
Determine the alarm that the system generated under the Net header.
Perform the correct procedure in Alarm and Performance Monitoring
Procedures to clear the alarm.
For additional help, contact the next level of support.
To return all traffic flow on all shelves of the affected plane, type
>DELOAD plane_number
and press the Enter key.
where
plane_number
is 0 or 1
The procedure is complete.
(end)
Do
step 55
step 59
shelf_number
Do
step 59
step 56
Do
step 57
step 58
CLEAR ALL