Nortel DMS-100 Manual page 348

Recovery procedures for individual devices and services
Recovering volumes marked INERROR
REGULAR AMA VOLUME WILL BE MARKED AS "READY"
vol_name: VOLUME nn IN REGULAR POOL n, pool_name
DONE – AUDITING AFFECTED VOLUME/SUBSYSTEM(S).
If
If more INERROR volumes
are present
are not present
9 To query the subsystem again and verify the status of the reset volumes, type
>QUERY ssys
and press the Enter key.
where
ssys
is the affected subsystem
If
If the INERROR volumes
have the label READY
do not have the label READY
10 Determine if any other volumes have the label INERROR.
If
If any other volumes
have the label INERROR
do not have the label INERROR step 12
11 For additional help, contact the next level of support.
12 The procedure is complete.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Do
Do
step 7
step 9
VOLUMES
Do
Do
step 12
step 11
Do
Do
step 7
4-141
(end)