Nortel DMS-100 Manual page 220

Recovery procedures for individual devices and services
link_no
is the number of the link in the posted linkset (0 to 15)
link_no
is the number of the link in the posted linkset (0 to 7)
If the RTS command
passed
failed
42 Activate the link by typing
>ACT link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link in the posted linkset (0 to 7)
If the RTS command
passed
failed
43 Determine if traffic is running on the link by typing
>QUERYTRF
and pressing the Enter key.
where
link_no
is the number of the link in the linkset (0 to 15)
link_no
is the number of the link in the linkset (0 to 7)
Example of a MAP response:
QueryTrf: Link occupancy for 13:30:00 - 14:00:00
Link Speed
4 7000
Note: In the Byte/sec, Erlang, and MSU len fields, a value of 0 (zero)
means that no traffic is running, and a value greater than zero means that
traffic is running. In the above example, no traffic is running on the link.
If traffic on the link is
running, and the linkset is InSv
or ISTb
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for call completion
link_no
Byte/sec Erlang
0 0.00
Do
step 42
step 50
Do
step 43
step 50
MSU len %RTx
0
Do
step 46
4-13
(continued)
Msg/sec
0 0