Nortel DMS-100 Manual page 206

Recovering SuperNode SE application specific units
22 Return the NIU unit to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
23 Access the link interface unit inventory table by typing
>TABLE
and pressing the Enter key.
24 List the contents of the inventory table by typing
>LIST
and pressing the Enter key.
25 Record the LIUNO (LIU number) of any LIU7, EIU, VPU, APU, XLIU, FRIU,
SVR7, HLIU, and HSLR associated with the SuperNode SE LIS or ENI shelf
being recovered.
26 Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
27 Display a list of all system-busy PMs by typing
>DISP
and pressing the Enter key.
Example of a MAP response:
SysB LIU7
28 Determine if any of the PMs recorded in step 25 appear in the MAP response
generated at step 27.
If there are
system busy PMs associated
with the shelf being recovered
no system busy PMs associated
with the shelf being recovered
29 Post the system-busy PM by typing
>POST
and pressing the Enter key.
where
UNIT 1
LIUINV
ALL
STATE SYSB
: 102, 202, 207, 302, 308
pm_type pm_no
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
Do
step 15
step 33
Do
step 29
step 34
3-39
(continued)