Nortel DMS-100 Manual page 207

3-40 Node level recovery procedures
Recovering SuperNode SE application specific units
30
31
32
33
34
297-8021-545 Standard 14.02 May 2001
pm_type
is the type of PM (LIU7, EIU, APU, VPU, XLIU, FRIU, SVR7, HLIU, or
HSLR)
pm_no
is the number of the system-busy PM
Manually busy the posted PM by typing
>BSY FORCE
and pressing the Enter key.
Load the posted PM by typing
>LOADPM
and pressing the Enter key.
If the LOADPM command
passed
failed
Return the PM to service by typing
>RTS pm_type pm_no
and pressing the Enter key.
where
pm_type
is the type of PM (LIU7, EIU, APU, VPU, XLIU, or FRIU)
pm_no
is the number of the system-busy PM
If the RTS command
passed
failed
For further assistance, contact the personnel responsible for the next level of
support.
You have completed this procedure.
(end)
Do
step 32
step 33
Do
step 27
step 33