Emergency Shutdown Of One Lim Unit On Each Elpp - Nortel DMS-100 Manual

Application
Use this procedure to conserve emergency backup power. To conserve
emergency backup power, shut down one link interface module (LIM) unit in
each enhanced link peripheral processor (ELPP) cabinet.
Action
The following flowchart is a summary of the procedure. Use the instructions
in the step-action procedure that follows the flowchart to perform the shutdown
task.
Emergency power conservation recovery procedures 5-137

Emergency shutdown of one LIM unit on each ELPP

DMS-100 Family NA100 Recovery Procedures LET0015 and up
Emergency power conservation