Nortel DMS-100 Manual page 328

Recovery procedures for individual devices and services
23 Verify the type of PM.
If the PM is an
HLIU
HSLR
24 Repeat steps 21 and 22 for the NTEX76 card that belongs to the stuck HLIU.
At the MAP terminal
25 Reload the HLIU or HSLR by typing
>LOADPM
and pressing the Enter key.
If the LOADPM command
passed
failed
26 Return the HLIU or HSLR to service by typing
>RTS
and pressing the Enter key.
If the RTS command
passed
failed
27 For further assistance, contact the personnel responsible for the next level of
support.
28 You have completed this procedure.
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Recovering a stuck HLIU or HSLR
Do
step 24
step 25
Do
step 26
step 27
Do
step 28
step 27
4-121
(end)