Nortel DMS-100 Manual page 79

2-32 System level recovery procedures
Performing a reload-restart
Performing a reload-restart
At your current location
1
At the MAP terminal
2
3
297-8021-545 Standard 14.02 May 2001
(continued)
WARNING
Contact the next level of support
Do not attempt this procedure before you contact the next
level of support.
WARNING
Loss of service
All calls drop during a reload-restart, and billing data does
not record.
WARNING
Extended service interruption
Execute the restart from a MAP terminal. According to the
severity of the problem, MAP terminals can be out of service.
If a MAP terminal is not available, perform the restart from
the CM reset terminals.
Determine if you can use a MAP terminal to execute the restart.
If you
can use a MAP terminal
cannot use a MAP terminal
To access the CI level of the MAP display, type
>QUIT ALL
and press the Enter key.
To restart the switch, type
>RESTART RELOAD ACTIVE
and press the Enter key.
Example of a MAP response:
Do
step 2
step 6