Nortel DMS-100 Manual page 179

3-12 Node level recovery procedures
Recovering the enhanced network
43
44
45
46
47
48
49
297-8021-545 Standard 14.02 May 2001
To select a system busy plane-shelf and set it to manual busy, type
>BSY plane_number
and press the Enter key.
where
plane_number
is 0 or 1
shelf_number
is 0 to 1 for 64K ENET, or 0 to 7 for 128K ENET
Determine if the shelf you specified is busied correctly.
If the MAP response
is Request to MAN BUSY ENET Plane:n Shelf:nn
completed.
is WARNING: You will be aborting the following
maintenance action on ENET Plane:n Shelf:nn.
Please confirm ("Yes" or "No")
Another maintenance action is in progress on the plane-shelf you specified.
To cancel the BSY command, type
>NO
and press the Enter key.
Wait 3 min for the in-progress maintenance action to complete. Go to step 37.
Determine if more system busy plane-shelves are present.
If
more system busy plane-shelves are present
all system busy plane-shelves are set to manual busy step 48
To load each node with the latest ENET image file, type
>LOADENALL file_name
and press the Enter key.
where
file_name
is the latest ENET image file name
Example of a MAP response:
WARNING: This action will be performed on ALL ENET shelves
that are MBSY. Please confirm ("YES" OR "NO")
To confirm the command, type
>YES
(continued)
shelf_number
Do
step 47
step 45
Do
step 43