Nortel DMS-100 Manual page 244

Recovery procedures for individual devices and services
At the affected MP position:
1 Determine if the MP position is on.
If MP position
is on
is off
2 To turn on the MP position, move the power switch on the MP VDU to the on
(1) position.
Power switch
If power switch is on, and MP
position
is on
is off
At the TAMI:
3 To access the Position Status/Control menu from the TAMI main menu, type:
>3
and press the Enter key.
Example of a MAP display response:
DMS-100 Family NA100 Recovery Procedures LET0015 and up
MP position (standalone)
Do
step 3
step 2
Rear view MP position
1 0
Do
step 3
step 15
recovery
(continued)
AC connector
Base controller
4-37