Nortel DMS-100 Manual page 204

Recovering SuperNode SE application specific units
If the SuperNode SE LIS or ENI
shelf is equipped with
any other type of ASU
9 Access the NIU inventory table by typing
>TABLE
and pressing the Enter key.
10 List the contents of the inventory table by typing
>LIST
and pressing the Enter key.
11 Record the NIUNO (NIU number) of each NIU associated with the
SuperNode SE LIS or ENI shelf being recovered.
12 Access the PM level of the MAP display by typing
>PM
and pressing the Enter key.
13 Post the NIUs recorded in step 11 by typing
>POST
and pressing the Enter key.
where
niu_nos
Note: Use a space to separate each number from the preceding number.
Example input
>POST
14 Determine if the posted NIU is system-busy.
If the posted NIU is
system-busy
in any other state
15 Access the next NIU in the posted set by typing
>NEXT
and pressing the Enter key.
If
the set is empty
the next NIU in the set is posted
NIUINV
ALL
NIU niu_nos
are the numbers of the NIUs (0 to 29) associated with the LIS or ENI
shelf
NIU 4 12
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Node level recovery procedures
Do
step 23
Do
step 16
step 15
Do
step 23
step 14
3-37
(continued)