Nortel DMS-100 Manual page 113

2-66 System level recovery procedures
Recovering from a dead system in a SuperNode switch
60
61
62
63
64
297-8021-545 Standard 14.02 May 2001
Example of a MAP response:
Date is THU. 12/JUL/1996
To access the SRSTATUS level of the MAP display, type
>MAPCI;MTC;SRSTATUS
and press the Enter key.
Example of a MAP display:
SRSTATUS
OVERALL STATUS Pend:
0 Quit VIEW: SYSTEM
2 View_ Pend InPrg
3 List_ MS 0
4 NET 0
5 SER1 0
6 SER2 1
7 SER3 11
8
9 SRSTATUS:
Determine the recovery status of the MSs.
Note: MS recovery status appears to the right side of the word MS in the
MAP display. Recovery status for each MS can be one of pending, in
progress, complete, or failed.
If status of either MS
is failed recovery
is pending recovery
is other than listed here
Wait for recovery of both MSs to be in-progress, or complete.
When both MSs are no longer pending recovery, go to step 61.
To access the MS Clock level of the MAP display, type
>MS;CLOCK
and press the Enter key.
To synchronize the clocks, type
>SYNC
and press the Enter key.
If the SYNC command
succeeded
failed
00:00:00
18% InProg: 9%
Comp Fail
0 2 0 IOD
0 6 0 Other 21
1 6 0
1 60 1
8 30 1
Do
step 183
step 62
step 63
Do
step 66
step 65
(continued)
Comp: 70% Fail: 3%
11:52:34
Pend InPrg Comp Fail
5 5 30
3 13
2
3