Nortel DMS-100 Manual page 291

4-84 Recovery procedures for individual devices and services
Recovering CCS7 linksets
31
32
33
34
35
297-8021-545 Standard 14.02 May 2001
(continued)
To determine which link this HSLR belongs to, type
>QUERYPM
and press the Enter key.
Go to step 32.
To post the linkset type
>CCS;CCS7;C7LKSET;post c linkset_name
where linkset_name is that returned by the QUERYPM command.
To manually busy the link, type
>BSY link_no
and press the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
Note: The link_no shown applies only to the ITU protocol. ITU is the only
protocol that supports MLIU.
If the response is
Link link_no:Traffic is running on
that link
Please confirm("YES","Y","NO",
"N"):
anything else including additional messages with
above response
To confirm the command, type
>YES
and press the Enter key.
To return the link to service, type
>RTS link_no
and press the Enter key.
where
link_no
is the number of the link in the posted linkset (0 to 15)
Do
step 34
or
step 44