Nortel DMS-100 Manual page 264

Recovering AMA data with block numbers
and press the Enter key.
Example of a MAP display:
REQUEST SENT TO SUBSYSTEM.
Go to step 14.
11 To close the active volume, type
>CLOSE
and press the Enter key.
Example of a MAP display:
SENDING REQUEST TO SUBSYSTEM
PLEASE CONFIRM ("YES" or "NO")
12 To confirm the request, type
>YES
and press the Enter key.
Example of a MAP response:
REQUEST SENT TO SUBSYSTEM.
13 Allocate a volume.
Refer to Allocating recording volumes in the DIRP utility in Routine
Maintenance Procedures , and return to this point.
14 To query the volumes that are in the AMA subsystem, type
>QUERY
and press the Enter key.
Example of a MAP display:
QUERY AMA PARALLEL NONE
15 Check the DIRP logs for details on closure of the active volume.
Example of a MAP display:
DIRP101 AUG13 19:50:33 nnnn INFO_DIRP_FLOW_LOG REASON= 16 SSYS#=0
SSNAME= AMA POOL#= 0 VOLUME#= # 22 SOS–FILE–ID= nnnn nnnn nnnn
TEXT1= NEXT PARALLEL FILE BLOCK NUMBER: 1
TEXT1= NEXT ACTIVE FILE BLOCK NUMBER: 4
16 To exit the table, type
>QUIT
and press the Enter key.
17 Load a blank or expired tape on the magnetic tape drive.
Refer to Magnetic Tape Reference Manual , 297-1001-118, and return to this
point.
Recovery procedures for individual devices and services
AMA PARALLEL
AMA VOLUMES
DMS-100 Family NA100 Recovery Procedures LET0015 and up
CHECK DIRP LOGS FOR DETAILS
CHECK DIRP LOGS FOR DETAILS
PARM1= 0
PARM2= FFFF
4-57
(continued)