Keysight N432A Programming Manual page 495

UNIT[1]|2|3|4:POWer <amplitude_unit>
This command sets the power measurement unit for a specified window/
measurement.
For ratio and relative power measurements:
– If UNIT:POWer is set to W, the measurement unit is percentage.
– If UNIT:POWer is set to DBM, the measurement unit is dB relative.
Syntax
Parameter
Item
amplitude_unit
Example
UNIT1:POW DBM
Reset condition
On reset, the unit is DBM for all windows/measurements.
Keysight N432A Programming Guide
1
UNIT :POW
2
3
4
Description/Defaul t
Power measurement unit.
The default unit is DBM.
Space
This command sets the measurement unit to dBm for
the upper window/upper measurement.
UNIT Subsystem
amplitude_unit
?
Range of values
DBM
W
17
495