Keysight N432A Programming Manual page 335

OUTPut:RECorder[1]:LIMit:UPPer <numeric_value>
This command sets the maximum scaling value for the recorder output. The unit
used is dependent on the unit currently set for the CALC block specified in
OUTPut:RECorder[1]:FEED <data_handle>.
Syntax
OUTP :REC
Parameter
Item
numeric_value
Example
OUTP:REC:LIM:UPP 10
Reset condition
On reset, the maximum scaling value is set to 20 dBm.
Keysight N432A Programming Guide
:LIM
1
Description/Defaul t
A numeric value for the maximum scaling value.
The unit used, dBm, W, or %, is dependent on
the unit currently set for the CALC block
specified in
OUTPut:RECorder[1]:FEED
<data_handle>.
Space
:UPP
This command sets the maximum scaling value to
10 for the recorder output.
OUTPut Subsystem
numeric_value
?
Range of values
–150 to +230 dBm
1 aW to 100 XW
0 % to 999 %
11
335