Keysight N432A Programming Manual page 219

Thermistor power meter

Hide thumbs Also See for N432A:

Table of Contents

CALCulate[1]|2|3|4:GAIN Commands

These commands are used to enter and enable a display offset on the specified

window/measurement. The display offset is applied to the measured power after

any channel offset or mathematical functions have been included.

The following commands are detailed in this section:

CALCulate[1]|2|3|4:GAIN[:MAGNitude] <numeric value>

CALCulate[1]|2|3|4:GAIN:STATe <boolean>

Keysight N432A Programming Guide

CALCulate Subsystem