Keysight N432A Programming Manual page 232

4 CALCulate Subsystem
Parameter
Item
numeric_value
Example
CALC3:LIM:LOW 0.1
Reset condition
On reset, both measurements of the upper and lower windows are set to
–90.00 dBm or –90 dB.
Query
CALCulate[1]|2|3|4:LIMit:LOWer[:DATA]? [MIN|MAX]
This query returns the current setting of the lower limit or the values associated
with MIN and MAX for the specified window/measurement.
Query example
CALC2:LIM:LOW?
232
Description/Defaul t
A numeric value for the lower test limit
– DEF: The default is –90.00 dBm or –90 dB
– MIN: –150 dBm or –180 dB
– MAX: +230 dBm or +200 dB
This command enters a lower limit for the upper
window/lower measurement based on the window
units as follows:
dBm = 0.1 dBm
W = 100 mW
dB = 0.1 dB
% = 0.1%
Queries the lower limit setting of the lower window/ upper
measurement.
Range of values
–150 to +230 dBm or
–180 to +200 dB
DEF
MIN
MAX
Keysight N432A Programming Guide