Keysight N432A Programming Manual page 234

4 CALCulate Subsystem
Parameter
Item
numeric_value
Example
CALC2:LIM:UPP 5
Reset condition
On reset, both measurements of the upper and lower windows are set to
+90.00 dBm or +90 dB.
Query
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA]? [MIN|MAX]
This query returns the current setting of the upper limit or the values associated
with MIN and MAX for the specified window/measurement.
Query example
CALC2:LIM:UPP?
234
Description/Defaul t
A numeric value for the upper test limit
– DEF: The default is –90.00 dBm or –90 dB
– MIN: –150 dBm or –180 dB
– MAX: +230 dBm or +200 dB
This command enters an upper limit for the lower
window/upper measurement based on the window
units as follows:
dBm = 5 dBm
W = 5 W
dB = 5 dB
% = 5%
Queries the upper limit setting of the lower window/
upper measurement.
Range of values
–150 to +230 dBm or
–180 to +200 dB
DEF
MIN
MAX
Keysight N432A Programming Guide