Table of Contents
Advertisement
12
SENSe Subsystem
[SENSe[1]:]CORRection:CSET2:STATe <boolean>
This command is used to enable or disable the currently selected
frequency-dependent offset table. When a table has been selected and enabled,
the offsets stored in it can be used by specifying the required frequency using the
[SENSe[1]:]FREQuency command.
Syntax
SENS
1
Example
CORR:CSET2:STAT 1
Reset condition
On reset, the frequency-dependent offset table is not affected.
Query
[SENSe[1]:]CORRection:CSET2:STATe?
This query enters a 1 or 0 into the output buffer indicating whether a currently
selected frequency-dependent offset table is enabled or disabled.
– 1 is returned if the table is enabled.
– 0 is returned if the table is disabled.
364
:
CORR
:CSET
2
:STAT
This command enables the currently selected
frequency-dependent offset table.
Keysight N432A Programming Guide
Space
0|OFF
1|ON
?
Advertisement
Table of Contents
