Keysight N432A Programming Manual page 244

4 CALCulate Subsystem
CALCulate[1]|2|3|4:RELative:STATe <boolean>
This command enables or disables the relative mode for the specified window/
measurement. If the command is:
– disabled, the measurement signal remains unchanged.
– enabled, the current reference value set by
Syntax
Example
CALC3:REL:STAT OFF
Reset condition
On reset, relative mode is disabled.
Query
CALCulate[1]|2|3|4:RELative:STATe?
This query enters a 1 or 0 into the output buffer indicating the status of the relative
mode.
– 1 is returned if the relative mode is enabled.
– 0 is returned if the relative mode is disabled.
244
CALCulate:RELative:MAGnitude:AUTO is applied to the measurement signal.
CALC 1
2
3
4
:STAT
:REL
This command disables the relative mode for the
upper window/lower measurement.
Space
0|OFF
1|ON
?
Keysight N432A Programming Guide