Keysight N432A Programming Manual page 352

Thermistor power meter

Hide thumbs Also See for N432A:

Table of Contents

SENSe Subsystem

[SENSe[1]:]RVALue?

This query returns the current resistance value of Ruser or Rmeas, depending on

which type is being currently used.

Query example

Error messages

– The [SENSe[1]:]RVALue command is only applicable for Ruser. If this

– If the <numeric_value> parameter exceeds the ±10% tolerance level of the

Queries the resistance value of the current resistance type.

command is sent when the resistance type is Rmeas, error –221,"Settings

conflict" occurs.

bridge resistance, error –222,"Data out of range" occurs.

Keysight N432A Programming Guide