Table of Contents
Advertisement
Device Status Register Set
The device status register set contains the information which provides the device
status information. The contents of the individual registers of this register set can
be accessed by appending the commands listed in
Commands.
The following descriptions detail the SCPI register you require to control and some
examples on the register set commands.
The one device status register set is:
STATus:DEVice
The following bits in this register are used by the N432A:
Bit
0
1
2 to 11
12
13
14
15
The channel A sensor connected bit (bit 1), when queried by
STATus:DEVice:CONDition?, is set to:
– 1, when a thermistor sensor is connected.
– 0, when no thermistor sensor is connected.
Keysight N432A Programming Guide
Weight/Decimal value
1
2
–
4096
8192
16384
32767
Status Register Set
Definition
Not used
Channel A sensor connected
Not used
Over temperature
Fan failure
Front panel keypress
Always 0
STATus Subsystem
14
413
Advertisement
Table of Contents
